M9108-AGC-2 | ELECTRIC MOTOR ACTUATOR; 70 IN-LB/8NM; 24 VAC/VDC; ON/OFF - FLOATING; 30 SEC; 2 AUX SWITCHES | Johnson Controls
Documents and manuals
Johnson Controls M9108-AGC-2 Documents
Overview
Details for M9108-AGC-2
ELECTRIC MOTOR ACTUATOR; 70 IN-LB/8NM; 24 VAC/VDC; ON/OFF - FLOATING; 30 SEC; 2 AUX SWITCHES
Description
The M91xx Series includes M9116, M9124, and M9132 models. All of these direct-mount electric actuators operate on AC/DC 24 V power. The M91xx actuators are available for use with on/off, floating, proportional, or resistive controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to a 3/4 in. (20 mm) in diameter or a square shaft up to 5/8 in. (16 mm). They may be direct or remote mounted to a damper, or mounted to a valve using one of the M9000-5xx Valve Linkage Kits.
A single M91xx model delivers up to 280 lb·in (32 N·m) of torque. Two -AGx, -GGx, or -HGx models in tandem deliver twice the torque or 560 lb·in (64 N·m). The angle of rotation is mechanically adjustable from 0 to 90° in. 5-degree increments. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switches, a potentiometer, or a DC 0(2) to 10 V signal.
- Damper Actuator
- 20..30 VAC/24 VDC
- On/Off & Floating Point
- Non-Spring Return
- 70 in-lb Torque
- Screw Terminals
- 2 x SPDT
- 25..50 sec Runtime
- NEMA 2
- 0051 - 0075 IN-LB
Specifications
Item Number | M9108-AGC-2 |
Brand | Johnson Controls |
Actuator Type | Damper |
Category | Dampers & Actuators |
Control Input | Floating |
End Switch | Yes |
Housing | NEMA 2 |
Section | Electric Actuators |
Section | Valves & Actuators |
Spring Return | Non-Spring Return |
SubCategory | Electric Actuators |
Torque | 70 in-lb |
Voltage | 24V |
Contractor Rewards Program
Learn more about POINTS PLUS Contractor Rewards Program
Already part of the POINTS PLUS Program?
Enter your Contractor ID # in the comment field of your order on Blackhawk Supply