U020-0028 | Flow | Mag | 12 in | PTFE | Grd Rng | Amp | Veris

Flow | Mag | 12 in | PTFE | Grd Rng | Amp

FEATURES

• Open flow tube design...no head loss, no moving parts to fail
• Works with most solids common in liquid systems...great for well water and reclaimed water systems...not fouled by sand, gravel, or debris
• Bi-directional flow measurement capability...suitable for inter-city billing
• Password protection...protect against unwanted program changes
• Wide flow range...exceeds operating characteristics of turbine and propeller meters
• 0.25% accuracy independent of fluid viscosity, density, and temperature
• Corrosion resistant liners...ensures long life
• Rubber or PTFE lined...application flexibility
• Electronics (head) can be mounted remotely...added control options

DESCRIPTION

Electromagnetic (mag) flow meters are capable of measuring flow in almost any liquid, slurry, or paste with a minimum of electrical conductivity using Faraday’s law of induction. These meters are highly accurate, at 0.25% or better, exceeding AWWA accuracy standards for mechanical meters. The smart, micro-processor based electronics are simple to operate, with AMR and SCADA ready standard outputs. The NEMA 4X enclosure provides durability.

APPLICATIONS

• Monitoring flow in systems likely to contain solids

SPECIFICATIONS

Flow Range 0.1 to 39.4 fps (0.03 to 12 m/s)
Max. Operating Pressure 150 psi
Accuracy ±0.25% of rate for velocities greater than 1.64 fps (0.50 m/s); ±0.004 fps (±0.001 m/s) for velocities less than 1.64 fps (0.50 m/s)
Repeatability ±0.1%
Analog Outputs 4-20mA, 0-20mA, 0-10mA, 2-10mA (programmable and scalable)
Voltage sourced 24VDC (isolated); max. loop resistance < 800 Ω
Digital Outputs Four total, configurable 24VDC sourcing active output (up to two), 100mA total, 50mA each; sinking open collector output (up to four), 30VDC max.,
100mA each; AC solid-state relay (up to two), 48VAC, 500mA max.
Pulse Outputs Scalable up to 10 kHz, passive open collector up to 10 kHz, active switched 24VDC. Up to two outputs (forward and reverse) Pulse width programmable
from 1-1100 msec or 50% duty cycle
Flow Direction Unidirectional or bidirectional, 2 separate totalizers (programmable)
Coil Power Pulsed DC
Minimum Conductivity 5.0 micromhos/cm
Electrode Materials Standard: alloy C; Optional: 316 stainless steel, gold/platinum plated, tantalum, platinum/rhodium
Liner Material PFA up to 3/8”, PTFE 1/2” thru 24”, soft or hard rubber from 1” thru 54”
NSF Listed Models with hard rubber liner 4” size and up; Models with PTFE liner all sizes
Fluid Temperature With remote amplifier: PFA, PTFE, 155°C (311°F) With Meter Mounted Amplifier: Rubber 80°C (178°F); PFA, PTFE 100°C (212°F)
Pipe Spool Material 316 stainless steel
Meter Housing Material Carbon steel welded
Flanges Standard (ANSI B16.5 Class 150 RF): carbon steel; Optional: 316 stainless steel
Meter Enclosure Classification NEMA 4X (IP66); Optional: Submersible NEMA 6P (remote amplifier required)
Junction Box Enclosure Protection For remote amplifier option: powder coated die-cast aluminum, NEMA 4 (IP65)
Cable Entries ½” NPT cord grip
Optional Stainless Steel Grounding Ring Thickness For meter sizes up to 10”: 0.135” thickness per ring; For meter sizes above 10”: 0.187” thickness per ring

POWER SUPPLY

AC 85-265VAC; typical power: 20VA or 15W; max. power: 26VA or 20W
DC (optional) 10-36VDC; Typical power: 10W; max. power: 14W