CDLSHTC | CO2 | Duct | LCD | RH | Temp | 1k RTD | Veris
$0.00
Get your Special Pricing!
Log In / Create an Account for the LOWEST PRICING on our most Popular Brands!
Availability: Get a Quote
Orders over $999 ship FREE*
*Free shipping applies within the continental US and weighing less than 50 lbs. Shipping and Returns Terms
Ship to Estimates
Are you from Illinois?
Yes / No
This item ships to
Illinois, 60601, United States Change
Cancel


*shipping cost are estimated until you complete your order

The product is not cancelable or returnable unless found defective

Speak With a Technical Expert

Image for Technical Expert

Documents: CDLSHTC

CDLSHTC | CO2 | Duct | LCD | RH | Temp | 1k RTD | Veris

Deluxe High-Impact ABS Plastic +/-2% RH 1 kOhm Platinum RTD CO2, Humidity and Temperature Sensor with LCD Display

Brand: VerisSKU: CDLSHTC
Veris | CDLSHTC
The photo is for representation purposes only and may not be a photo of product being purchased.
Search products similar to CDLSHTC

Overview Details for CDLSHTC

CDL carbon dioxide (CO2) sensors maximize energy savings, while helping optimize ventilation. These sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and increasing tenant comfort.

  • Microprocessor based design increases accuracy and reduces installation time
  • Self-calibrating - innovative self-calibration algorithm easy to maintain
  • Non-dispersive infrared technology (NDIR) repeatable to +/-20 ppm +/-1% of measured value high accuracy measurement
  • Snap-on faceplate no screws required, making installation and service easy
  • Field-selectable outputs for operation flexibility
  • Integrated probe - integrated transducer and probe eliminates the need to install a separate pick-up tube
  • Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) US Patent 5,844,138 HS sensor
  • Solid-state, integrated circuit sensor

Specifications

Item Number CDLSHTC
Brand Veris
Application Zone Plant Room
Application Duct
Brand Veris
CO2 Measurement Accuracy ±30 ppm ±2% of measured value
CO2 Measurement Range 0 - 2000 ppm | 0 - 5000 ppm
CO2 Measurement Repeatability ±20 ppm ±1% of measured value
CO2 Measurement Resolution 1 ppm
CO2 Sensor Type NDIR
Color Cloud White
Dimension Depth 2.4" (61 mm)
Dimension Height 3.1" (78 mm)
Dimension Probe Diameter 1" (25.4 mm)
Dimension Probe Length 7.8" (198 mm)
Dimension Width 6.7" (170 mm)
Display Resolution 2 Rows x 8 Characters
Display Size 1.2" x 0.6" (30;5 mm x 14 mm)
Display Type LCD
Electrical Wiring Size 24 - 14 AWG (0.22 - 2.5 mm²)
Enclosure Material ABS Plastic
Humidity Measurement Accuracy ±2%
Humidity Measurement Range 0 - 100% RH
Humidity Measurement Resolution 0.1% RH
Measurement Type CO2 | Humidity | Temperature
Mounting Duct
Operating Humidity 0 - 95% RH; non-condensing
Operating Temperature 50 - 95 °F (10 - 35 °C)
Output Specifications 4 - 20 mA | 0 - 5 V | 0 - 10 V
Outputs Analog output | Resistive temperature output
Product Certification CE
Product Type Sensor
Range CDL
Response Time CO2: <60 seconds for 90% step change
Sensor Configuration Duct
Sensor CO2 Carbon Dioxide
Supply Voltage AC Nominal 24 VAC
Supply Voltage DC Nominal 20 - 30 VDC
Temperature Calibration Certificate None
Temperature Measurement Accuracy ±0.6 °F (±0.3 °C)
Temperature Measurement Range 32 - 122 °F (0 - 50 °C)
Temperature Sensor Type 1k Ohm Platinum RTD
Warranty 5 years
With LCD Yes

Reviews

Customer Reviews
5.0 Based on 2 Reviews
5 ★
100% 
2
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
NB
01/21/2020
Naseem B.

We got all in one

The VERIS all in one temperature, moisture, and CO2 levels regulator have been lifesaving for our business. You need fewer units to buy and install which creates economies of the...read moreThe VERIS all in one temperature, moisture, and CO2 levels regulator have been lifesaving for our business. You need fewer units to buy and install which creates economies of the scale itself. The integrated transducer makes it easier to work in variable voltage networks. You should always apply a 5 -year calibration interval and there is always the chance for a direct application with no need to place screws. The device can adjust the heat and moisture as well as to detect dangerous CO2 levels that will enable an emergency shutdown of the system.

KH
01/03/2020
Karter H.

Easy regulation and maintenance

The CO2 emissions have been a great concern for our business. We finally managed to buy the VERIS Duct and LCD regulators that are easily placed on any wall and...read moreThe CO2 emissions have been a great concern for our business. We finally managed to buy the VERIS Duct and LCD regulators that are easily placed on any wall and give you accurate indications of the situation you are living in. The moisture and heat are easily regulated by the same device since it is directly connected to the actuator and thermostat. It is easy to maintain, and it has a special self-calibration algorithm for better function.