VR8345Q4563 | UNIVERSAL ELECTRONIC IGNITION GAS VALVE, 2 STAGE. STANDARD OPENING. 3/4 X 3/4, 24 VAC, 50/60 HZ, REG. SET 3.5 WC HIGH RATE, 1.7" WC LOW RATE. IP/DSI/HSI, WITH CONVERSION KIT & TWO 3/4 X 1/2 REDUCER BUSHINGS | Resideo

UNIVERSAL ELECTRONIC IGNITION GAS VALVE, TWO STAGE. STANDARD OPENING. 3/ 4" X 3/4", 24 VAC, 50/60 HZ, REG. SET 3.5" WC HIGH RATE, 1.7" WC LOW RATE. IP/DSI/HSI, INCLUDES CONVERSION KIT AND TWO 3/4" X 1/2" REDUCER BUSHINGS.

The VR8345M Universal Electronic Ignition Gas Control is used in gas-fired appliances with capacities up to 300 cu ft/hour at 1 inch wc pressure drop [8.5 cu m/hour at 0.25 kPa] for natural gas. The VR8345M will operate with a direct spark ignition (DSI), hot surface ignition (HSI) or intermittent pilot ignition. The control includes a manual valve, two automatic operators, a pressure regulator, pilot adjustment, pilot plug, and ignition adapter.

• Compatible with hot surface pilot, intermittent pilot and direct spark ignition.
• Replaces virtually any IP, HSI or DSI gas control.
• For use with 24 Vac heating appliances that burn natural or manufactured gas or liquiefied petroleum (LP) gas. (Includes converter kit to adapt from natural gas to LP gas.)
• Compact to fit into tightly packed, high efficiency heating equipment.
• Works with virtually all residential equipment and all but the largest commercial equipment, with a regulation capacity range of 30,000 to 415,000 Btuh natural gas (48,600 to 672,300 LP gas).
• All adjustments and wiring connections accessible from top of control.
• Straight-through body pattern.
• 1/8 in. NPT inlet and outlet taps on top of gas control aid adjustment of gas pressure in problem installations.
• 3/4 in. x 3/4 in. inlet and outlet fit easily on high capacity systems plus others using 1/2 in. reducer bushings.
• 4.0 in. swing radius allows easy rotation into position inside the tightest furnace vestibules.
• Can be installed at any angle including vertically between 0 and 90 degrees from the upright position.
• Clearly marked, keyed termianl block allows quick attachment of wires and IP/DSI/HSI jumper. Keyed jumper cannot be incorrectly inserted.
• Internal inlet screen blocks contaminants in gas line from entering valve.
• -40°F to +175°F (-40°C to +79°C) temperature range standard.
• Standard opening.