VNT5070H1000 | TRUEFRESH HEAT RECOVERY VENTILATOR (HRV). 70 CFM MODEL. | Resideo

TRUEFRESH HEAT RECOVERY VENTILATOR (HRV). 70 CFM MODEL.

Descripion

• Indoor air in homes often contains significantly more unhealthy pollutants than outdoor air, making it a significant contributor to poor indoor air quality. Air ventilation can be used to improve indoor air quality by exchanging stale indoor air with fresh outside air. This is usually accomplished through two air streams; one air stream brings in fresh outside air while the second air stream exhausts stale indoor air to the outdoors. It is desirable to maintain the same amount of incoming air flow to outgoing air flow, which is referred to as balanced ventilation. Product Overview & Description
• Heat Recovery Ventilators (HRV’s) meet the demand for balanced ventilation while transferring sensible heat from one air stream to the other through a heat exchanger core. Similarly, Energy Recovery Ventilators (ERV’s) transfer both sensible and latent heat between air streams.
• The HRV is equipped with a non-moisture transfer cross-flow core, while the ERV is equipped with enthalpic cross-flow cores.
• The compact HRV and ERV are offered at a 70 CFM nominal airflow configuration primarily for small space applications such as apartments, condominiums, and tightly built new homes and are designated VNT5070H1000 and VNT5070E1000, respectively.
• Both the HRV and ERV are equipped with a variable speed blower in each air stream. This allows for independent adjustment of the airflow rate in either air stream.
• Ventilation modes include Off, Continuous, and Intermittent modes. In the Off mode the ventilator will remain off and will not respond to any ventilation request; in Continuous mode the ventilator is powered and is continuously exchanging stale indoor air with fresh outdoor air on low speed ventilation, except when there is a request for high speed ventilation from a remote control; in Intermittent mode the ventilator is on standby until there is a call for ventilation from a remote device, at which time the ventilator will run at high speed while the remote request is present.
• The on-board function controller allows for selection of ventilation modes and blower speed settings.
• Honeywell ventilators are rated at 120VAC, 60Hz, 0.85 Amps power requirements.
• Honeywell ventilators are listed CSA C22.2 #113-10 (Canada & US).
• The 70 CFM HRV and ERV ventilators are HVI-certified.