Get your Special Pricing!

Web Price:

$192.53

Availability: This product is currently available to purchase

Orders over $999 ship FREE*

*Free shipping applies within the continental US and weighing less than 50 lbs. Shipping and Returns Terms

Ship to Estimates

Are you from Chicago?

Yes / No

This item ships to

Change

Cancel

*shipping cost are estimated until you complete your order

The product is not cancelable or returnable unless found defective

Speak With a Technical Expert

Hours: 9am - 5pm CDT M-F

Call (847) 773-0645 Email Technical Expert

Documents: DM-2006-LCD

Instruction Manual Series DM-2000 Catalog Page DM-2000 More Info

DM-2006-LCD | Differential pressure transmitter | range 3.00" w.c. | 746 Pa | 76.2 mm w.c. | 7.46 mbar | .746 kPa | .108 psi | black overlay with LCD display | Dwyer

Differential pressure transmitter, range 3.00" w.c., 746 Pa, 76.2 mm w.c., 7.46 mbar, .746 kPa, .108 psi, black overlay with LCD display

Brand: DwyerSKU: DM-2006-LCD

The photo is for representation purposes only and may not be a photo of product being purchased.

Search products similar to DM-2006-LCD

Jump to: Overview & Specifications Reviews

Overview Details for DM-2006-LCD

See catalog product page for full listing

Series DM-2000 Differential Pressure Transmitter

Quick Response, Easy Calibration Checks

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges.

Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single push button allows field selection of 4 to 6 engineering units depending on range.

LIMITED QUANTITIES AVAILABLE.

Product Applications

Filter monitoring
Fan pressure indication
Static pressures in ducts or buildings
Bi-direction ranges ideal for sensing fluctuating building pressure

Zero and span controls provide easy calibration checks and shorter installationtime to get device running and monitoring
Quick response to pressure changes means no delay in signaling and alerting tocritical situations
Easy to read LCD display provides immediate local alerts allowing corrective actionto be taken quicker to eliminate the problem from becoming widespread
Same size as Magnehelic simplifies field upgrade to digital pressure gage byreducing install steps
Tamper proof button configuration to prevent accidental changes to the settings

Specifications

Series: DM-2000 Differential Pressure Transmitter
Category/Type: Pressure
Type: Differential Pressure
Series: DM-2000 Differential Pressure Transmitter
Service: Air and non-combustible; compatible gases.
Wetted Materials: Consult Factory.
Accuracy: ±1% FS; ±30 Pa model ±4% FS at 70°F.
Stability: ±1% FS/yr.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Pressure Limits: 10 psig (0.69 bar).
Thermal Effect: ±0.055% FS/°F (0.099% FS/°C); ±30 Pa model ±0.13% FS/°F (0.234% FS/°C).
Power Requirements: 10 to 35 VDC (2 wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Digital push-button zero and span.
Loop Resistance: DC: 0 to 1250 Ω maximum.
Current Consumption: DC: 38 mA maximum.
Electrical Connections: Screw-type terminal block.
Display: 3.5 digit LCD; 0.7" height.
Process Connections: 1/8" I.D. tubing.
Mounting Orientation: Vertical.
Weight: 4.8 oz (136 g).