Get Special Pricing!

Control-Station | Station For Manual Local Electrical Operation Of S70 Actuators | Bray (OBSOLETE)

The photo is for representation purposes only and may not be a photo of product being purchased.

Search products similar to Control-Station

Jump to: Documents Overview Specifications Reviews

Documents and manuals

Bray Control-Station Documents

Bray Series 70 Catalog

Overview

Details for Control-Station

DISCONTINUED MODEL, CONTACT TECHNICAL SUPPORT FOR REPLACEMENT OPTIONS

Station For Manual Local Electrical Operation Of S70 Actuators

Description:

The Bray Control Station is a field or factory installed option that gives the operator the ability to locally drive the Series 70 actuator with electrical power; overriding the control signal from the process controller. Thecontrol station has a red (closed) and green (open) light to provide end-of-travel indication. It also has a 3-position switch:

Switch 1 lets the operator choose between the following three modes of operation:

1. Local: In this mode, using switch 2 the operator can drive the actuator to open or close position, or stop the actuator; overriding any control signal from the process controller.

2. Off: In this mode, the actuator can only be operated manually.

3. Remote: In this mode, the actuator is controlled remotely from a process controller.

The optional control station features a local-off-remote control switch, an open-stop-close switch, and two lights which locally indicate open and close valve position. This weatherproof aluminum enclosure is easily bolted to the four mounting holes located on the S70 conduit entry panel. The Control Station cover includes captive bolts and may be rotated in 90° increments allowing the customer to easily operate and view the control station. Two 3/4” NPT cable entries are available in the control station base. Two different multi-pin, weatherproof electrical cable connections are also available.