LMB24-3-T | Damper Actuator | 45 in-lb | Non-Spg Rtn | 24V | On/Off/Floating Point | Belimo
FREE SHIPPING ON ALL BELIMO PRODUCTS! (some exceptions apply)
Damper Actuator | 45 in-lb | Non-Spg Rtn | 24V | On/Off/Floating Point
For On/Off and floating point control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft from 1/4” up to 5/8” in diameter by means of its standard universal clamp. Shafts up to 3/4” diameter can be accommodated by an accessory clamp.
I didn't buy this damper actuator by accident. It was actually my colleague who recommended getting an LMB series by Belimo for floating-point control. The last couple of months showed that it's a capable device for up to 95-degree rotation. The price is excellent considering how energy efficient it turns out to be (especially in the holding mode). The free shipping from BHS is like the icing on the cake!
Belimo’s very own LMB24-3-T Damper Actuators are the best damper actuators anyone can possibly buy for whatever house system is in store. It is properly insulated and protected, and can operate at voltages up to 120 VAC. This happens while it consumes power for only as low as 5 watts on its own thanks to an efficient internal brush-less motor. The internal motor itself can run up from 40 up to 75 seconds at a time so it could adjust quickly depending on what the actuator could control. With a quick and safe motor action, fans around my home can be started safely. Wires are good, strong and flexible. Meanwhile, the running time for this actuator can be adjusted quite easily. The LMB24-3-T is so good that I recommended it to my colleagues at work too. They have been looking for ways to upgrade their own homes and there’s only this product for them to find.
The LMB24-3-T Damper Actuator has been on my personal radar for quite some time to the point that I needed to buy it for my new gas system. Boy I must say that it works quite more than I imagined. What makes the LMB24-3-T Damper Actuator so good unlike the others I’ve tried before? It has monitors that allow me to see if the rotation inside works just as fine or not. On this device alone, it has mechanisms that ensure it can detect whatever damage my gas system can have or not. Its power consumption is lower than I thought and it has a built-in switch. Why is this switch important? This is so that the device can be safely interacted within the maximum rotation of 95 degrees. If that’s not enough for you, the LMB24-3-T has a warranty for around 5 years, and it comes with Belimo’s free shipping. It’s worth for me, and it will be for you too.
I found this LMB24-3-T Damper Actuator, produced by Belimo, quite easy to install. It all began when I first worked on upgrades for my ventilation system. All that unnecessary noise kept on bothering us even at night. Since then, I searched through the Net for this. It wasn’t long before I got hooked by the things the ads told me it could do. It can take as much as 95 degrees of rotation, with attached indicators that notify the position of the actuator. This device also has an anti-rotation strap to prevent from moving sideways or what. Its sensor-less brush-less DC motor and monitors not only consumes less power, but is also electronically and doubly insulated. That meant I don’t have to worry about getting grounded for most of the time. Reliable and accessible across, this humble product is worth the upgrades for my ventilation. Now I could sleep more at peace and quiet. I fully recommend the LMB24-3-T Damper Actuator.