2510KG1B | Single Unit Manual Switch, 30A, NEMA 1, 2-Pole, Toggle Operated, Red Indicator, 600VAC | Square D by Schneider Electric

Single Unit Manual Switch, 30A, NEMA 1, 2-Pole, Toggle Operated, Red Indicator, 600VAC

Single Unit Manual Switch

• Line Rated Current: 30A
• Motor Power HP: 3HP at 460V AC; 2HP at 230V AC, 115V AC; 3HP at 575V AC; 1HP at 90V DC; 2HP at 115V DC; 1.5HP at 230V DC
• System Voltage: 600V AC, 230V DC
• Poles Description: 2-Pole
• Control Type: Toggle Switch
• Number of Phases: 1-Phase
• Local Signaling: Red Indicator 230V
• Motor Starter Type: Non-Reversing
• Electrical Connection: Screw Clamp Terminals

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. They are designed for single or three phase AC motors. These nonreversing manual switches are toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has a 230 VAC red pilot light indicator. This device has a NEMA 1 enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. Enclosure is 4.25 inches tall, 2.44 inches wide and 2.88 inches deep. This device is UL Listed and CSA certified.