RPMC-B-003 | Critical room pressure monitor | 0.5% accuracy | 0-0.5" w.c. range | Dwyer (OBSOLETE)

Critical room pressure monitor, 0.5% accuracy, 0-0.5" w.c. range

Brand: DwyerSKU: RPMC-B-003

The photo is for representation purposes only and may not be a photo of product being purchased.

Search products similar to RPMC-B-003

Jump to: Overview & Specifications Reviews

Overview Details for RPMC-B-003

DISCONTINUED MODEL, CONTACT TECHNICAL SUPPORT FOR REPLACEMENT OPTIONS See catalog product page for full listing

Critical room pressure monitor | 0.5% accuracy | 0-0.5" w.c. range

SERIES RPMC STABILISENSE™ CRITICAL ROOM PRESSURE MONITOR

Room Status Indication, Magnehelic® Gage Size

The Series RPMC StabiliSENSE™ Critical Room Pressure Monitor is designed forcritical low differential pressure applications that require stringent pressure monitoringand alarming. The Series RPMC can be configured to monitor positive or negativepressure in protected environments and clean manufacturing areas. The RPMCis a complete system which enables access to pressure, security, calibration, andalarm setup. The RPMC StabiliSENSE™ critical room pressure monitor has a brushedstainless steel bezel that allows for easy cleaning.

The RPMC StabiliSENSE™ critical room pressure monitor has built-in status indicationLEDs that will appear green when within the user-defined pressure set range and willappear orange when outside of the pressure set range. 2 SPDT independent controlrelays with adjustable deadbands are also provided along with a 4-20 mA processoutput.

For additional ranges, see Series DHC Digihelic® Differential Pressure Controller.

Product Applications

Clean manufacturing areas
Semiconductor manufacturing
Pharmaceutical
Clean rooms
Research labs
Vivariums

Long term stable pressure measurements
2 SPDT relays allow for local alarming and alarming to control system
Automatic or manual alarm reset
Visual LED alarms provide immediate local alert allowing corrective action to betaken quicker to eliminate the problem from becoming widespread
Stores peak and valley process readings
Same installation diameter as Magnehelic® gage which simplifies field upgrade toRPMC StabiliSENSE™ critical room pressure monitor
Password protected setup menu ensures no errors by untrained personnel

Specifications

Series: RPMC STABILISENSE™ CRITICAL ROOM PRESSURE MONITOR
Category/Type: Pressure
Type: Room Status Monitors
Series: RPMC STABILISENSE™ CRITICAL ROOM PRESSURE MONITOR
Service: Air and non-combustible; compatible gases.
Measurement Technology: Capacitance cell.
Wetted Materials: Consult factory.
Housing Material: Die cast aluminum case and SS bezel.
Accuracy: ±0.25% RSS (includes non-linearity: ±0.24%; hysteresis: ±0.05%and non-repeatability: ±0.05%); or ±0.5% RSS (includes non-linearity: ±0.49%;hysteresis: ±0.05% and non-repeatability: ±0.05%).
Pressure Limits: 2 psig.
Temperature Limits: 32 to 140°F (0 to 60°C).
Compensated Temperature Limits: 32 to 140°F (0 to 60°C).
Thermal Effects: 0.030%/°F (0.050/°C) from 77°F (25°C).
Power Requirements: 12-28 VDC; 12-28 VAC 50 to 400 Hz.
Power Consumption: 3 VA max.
Output Signal: 4-20 mA DC into 900 Ω max.
Zero and Span Adjustments: Accessible via menus.
Response Time: 8 ms.
Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status.
Electrical Connections: 15-pin male high density D-sub connection. 18" (46 cm) cable with 10 conductors included.
Process Connections: 1/8" female NPT. Side or back connections.
Mounting Orientation: Mount unit in vertical plane. Size: 4-3/" (120.7 mm) OD x 2-21/32 (67.5 mm).
Weight: 1.90 lb (862 g).
: SWITCH SPECIFICATIONS
Switch Type: 2 SPDT relays.
Electrical Rating: 1 A @ 30 VAC/VDC.
Set Point Adjustment: Adjustable via keypad on face.