EISX9-100T | 9-port 10BASE-T/100BASE-TX extended performance switch | Contemporary Controls
Contemporary Controls part#: EISX9-100T
The EISX series of compact switching hubs answers the call for those industrial and commercial applications requiring a small footprint and extended temperature range from -40° to +75°C. This series is ideal for situations where outdoor temperatures are expected and compact size is a necessity. Both copper and fiber optic versions are available.
The EISX segments the Ethernet LAN into multiple collision domains. It acts as a "bridge" between data links—creating a larger network diameter than possible with repeating hubs. Each twisted-pair port automatically negotiates with its link partner the data rate to be 10 Mbps or 100 Mbps and either half- or full-duplex operation. If full-duplex is selected, the PAUSE flow control method can be selected. Half-duplex links use backpressure for flow control.
The switch learns port assignments by reading Ethernet frames and logs source addresses into a table which can hold over 4,000 addresses. With this information, it improves throughput by restricting traffic to only those ports party to a data exchange—while other data is simultaneously exchanged on other ports. Store-and-forward operation of frames is implemented using 256 kB of built-in memory.
Only standard straight-through cables are needed to connect copper ports to NICs or another hub. Eight Auto-MDIX ports are available on the EISX9-100T for attaching local devices or for use as an uplink port. The ninth port has a conventional MDI/X port and a MDI port that can be used as an uplink port. This allows cascading to another hub without the need of a crossover cable. In addition to one power LED, each port has an LED showing link/activity/data rate by color: green for 100 Mbps and yellow for 10 Mbps. Flashing indicates port activity.
The unit is shipped with a DIN-rail clip installed. If direct mounting to a sub-panel is desired, an optional panel mounting bracket, shipped with the product, can be installed after removing the DIN-rail clip.
The EISX can be powered from either wide-range, low-voltage AC or DC power. Redundant power connections are provided to accommodate back-up power schemes.
This product is available in three models. The EISX9-100T offers nine twisted-pair ports. The EISX9-100T/FT has eight twisted-pair ports and one multimode (1300 nm) port with ST connectors. The EISX9-100T/FC is identical except it uses SC connectors.
|Manufacturer Product Page|