1412 BTSS06404 | Type 4X, 12 | Stainless Steel Bus bar splitter trough with aluminium bus bars, and cover secured by 1/4 turns | 72L x 22W x 8H (in) | EXM

The 1412 BTSS bus bar splitter troughs are used indoors or outdoors to house bus bars for power distribution. Troughs and covers are made of high quality 14 GA stainless steel, with continuously welded corner seams. The opening has a curled lip around all sides to increase rigidity and prevent dripping water from entering the enclosure when the door is open. A high quality, robotically poured-in-place gasket ensures a complete and durable water tight seal. The captive pins of the concealed hinges can be pulled to remove the door. Quarter turn mechanisms ensure positive closing. Troughs are available in configurations of 3, 4 or 5 aluminum, tin plated bus bars, which mount on slanted insulators that are installed on an inner panel. Lugs must be ordered separately. There are no knockouts. Bus bars are also available drilled and tapped 1/4 - 20 at 6” intervals, just add suffix ‘DT’ to the catalog number (ie. 1412 BTSS...DT). Troughs are unpainted and brushed smooth. Inner panel is galvanized (other colors available). CSA Certified NEMA/EEMAC 4X / IP66

Made of high quality 304 stainless steel, with continuously welded corner seams. The cover is secured by ¼ turn locks. A robotically poured-in-place seamless gasket ensures a durable seal. The enclosure has stainless steel hinges, with safety pins. Wall mounting feet kit are provided. The body's construction is designed to prevent dripping water from entering the enclosure. Tin plated bus bars, are mounted on slanted insulators. The exterior is unpainted and has a finish brushed #4. CSA certified. NEMA 4X, 12. IEC 60529 IP66.