Get your Special Pricing!

Web Price:

$27.50

Availability: This product is currently available to purchase

Orders over $999 ship FREE*

*Free shipping applies within the continental US and weighing less than 50 lbs. Shipping and Returns Terms

View Alternatives

Ship to Estimates

Are you from Chicago?

Yes / No

This item ships to

Change

Cancel

*shipping cost are estimated until you complete your order

The product is not cancelable or returnable unless found defective

Speak With a Technical Expert

Hours: 9am - 5pm CDT M-F

Call (847) 773-0645 Email Technical Expert

Documents: I2-18062

Series I2-1 Catalog Page More Info

I2-18062 | Immersion temperature sensor | 6" insertion length | 100K Ω NTC Thermistor. | Dwyer

Immersion temperature sensor, 6" insertion length, 100K Ω NTC Thermistor.

Brand: DwyerSKU: I2-18062

The photo is for representation purposes only and may not be a photo of product being purchased.

Search products similar to I2-18062

Jump to: Overview & Specifications Reviews

Overview Details for I2-18062

See catalog product page for full listing

Immersion temperature sensor | 6" insertion length | 100K Ω NTC Thermistor.

Series I2-1 Immersion Temperature Probes

RTD & Thermistor Outputs, 304 SS Probes

The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building’s water distribution loop. The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line. The temperature sensors are available in 4" and 6" insertion lengths.

Note: A Series IW2 Thermowell must be used on pressurized air and water lines to prevent leakage around the probe.

Product Applications

Hot or chilled water line monitoring
HVAC and building automation systems

Direct wall mounting
6´cable
1/2" internal NPT accepts conduit for more industrial installation

Specifications

Series: I2-1 Immersion Temperature Probes
Category/Type: Temperature
Type: Sensors
Series: I2-1 Immersion Temperature Probes
Accuracy: Platinum RTD: ±0.6% @ 32°F (0°C); Nickel RTD: ±0.5°F @ 32°F (0°C); Balco RTD: ±0.1% @ 32°F (0°C); Thermistors: ±0.36°F from 32 to 158°F (0to 70°C).
Operating Temperature: -32 to 240°F (-35.5 to 115.5°C).
Probe Diameter: 1/4" (6.3 mm).
Cable Length: 6' (1.8 m).
Probe Material: 304 SS.
Mounting: 1/2" threaded connection to fit Series IW2 Thermowell.