The AIM2 can provide optical signal isolation. The output of the AIM2 can be adjusted to LIMIT THE SIGNAL. The output of the AIM2 can be RE-SCALED.
Used commonly for signal connection to variable speed drive controllers or chiller control packages, the AIM2 is versatile. Some of the features are:
- Solves ground loop problems.
- Isolates signal to grounded electric actuators.
- 600 VAC optical isolation and 1500 VDC optical isolation.
- Output range is field adjustable and limited to the highest adjusted value.
- Input and output are selectable for voltage or current.
- LED's indicate that incoming and outgoing power supply is present.
- Field choice of direct or reverse acting.
| Product | Type | Features |
| AIM2 | Optical isolation of an analog signal including re-scaling and limiting | All standard industry input and output signals are easily set using dip switches and jumper shunts, plus adjustable settings are available if needed. Output signal will not exceed range set. Easy-to-wire 45o terminals. Capable of adjustment for signal ranges such as 6-9 VDC, 1-17 VDC, and 0-1 mA. |
Snaptrack provided has factory drilled holes allowing DIN rail mounting clips to snap into the back of the snaptrack.
For DIN rail mounting order the "DRC Kit".
