LPPP0002 | Replacement 16" UV Twin Tube Lamp | Ultravation

Replacement 16" UV Twin Tube Lamp

Ultravation manufactures several configurations of Ultraviolet disinfection products to meet any installation criteria. Ultravation two lamp ultraviolet systems are designed to adequately treat up to a 5 ton system or 3,500 sq ft. Whenever possible use a two lamp configuration with the longest lamp length possible for the installation. Ultravation suggests mounting on the exit side of the HVAC system before the ductwork branches off. This will ensure that the airborne contaminants reaching the ultraviolet purification system and the OPTIONAL Re-Fresh Odor reduction module have been reduced to an acceptable Micron size by the HVAC systems filter. Ultravation Ultramax products have been designed for peak performance in the cooler temperatures commonly found in the supply plenum of a typical HVAC system. Installing an Ultraviolet system in the return may degrade the media filter and/ or collect dirt particles on the UV lamp glass gradually decreasing performance. If this is the obvious source of microbial growth then placing the Ultraviolet system in the return is the best solution. **Caution must be taken to ensure Ultraviolet light is not coming in contact with the media filter or being exposed outside the enclosed system. Ultravation’s exclusive Re-Fresh odor reduction module (OPTIONAL) performs continuous photo catalytic processing, constantly reducing or eliminating unwanted odor and bacteria resulting in clean fresh breathable air. Ultravation Ultraviolet systems produce no ozone. There is no harmful by-products or off gasing taking place in the sterilization process or the photo catalytic process. The surrounding illustrations show the flexibility offered with the Ultravation Ultramax product line actual installation may vary depending upon installation criteria, if you need help or have questions call our toll free help line: 1-866-GO-UV-AIR 468-8247 ext 16 9:00 am – 5:00 pm Est.