Posted by Adem Erturk on

INTRODUCING: THE WT-4000 Direct Digital Thermostat

The WT-4000 Series Digital thermostat is a non-invasive, direct digital control for non-installation replacement of existing pneumatic thermostats.

Product Highlights

Product Highlights

  • 20% money savings realized with programmable scheduling
  • 30% energy savings with occupancy sensor
  • Non-invasive, no valve installation
  • Easy, no-wire installation <30 minutes
  • Easy read, on-unit temperature
  • Zone-by-zone installation
  • Labor and energy savings (with self calibration)
  • 4-year battery life

NOW AVAILABLE TO ORDER

Product Features

  • Pneumatic to digital
  • Programmable schedule
  • Direct replacement for many existing pneumatic thermostats & applications (DA/RA)
  • No wire installation (batteries included)
  • Self-calibrating
  • Air leak detection
  • Easy temperature reading on unit display
  • Auto seasonal changeover
  • Occupancy sensor contact
  • Wireless communication to central BAS
  • Continuous zone monitoring*
  • Remote setpoint control*

*with gateway and building automation system

 

Benefits

  • Extend life of existing pneumatic systems
  • Move from 24/7 operation to occupied/unoccupied schedules
  • Continuous monitoring of room conditions
  • Reduced maintenance
  • Visibility to trend data & central automate building
  • Allows for phased upgrade to building systems
  • Reduces project cost
Product Code  Description
WT-4002-MCR Wireless pneumatic-to-DDC room thermostat, two-pipe, DA/RA dual control action, Celsius display; can be configured in the field for stand-alone applications
WT-4002-MCM Wireless pneumatic-to-DDC room thermostat with binary dry contact input for an occupancy sensor (field furnished), two-pipe, DA/RA dual control action, Celsius display; can be configured in the field for stand-alone applications
WT-4002-MFR Wireless pneumatic-to-DDC room thermostat, two-pipe, DA/RA dual control action, Fahrenheit display; can be configured in the field for stand-alone applications
WT-4002-MFM Wireless pneumatic-to-DDC room thermostat with binary dry contact input for an occupancy sensor (field furnished), two-pipe, DA/RA dual control action, Fahrenheit display; can be configured in the field for stand-alone applications
WT-ROUTER Router that extends the range of transmissions between the WT-4000 Series Pneumatic-to-DDC Room Thermostat and the WT-BAC-IP Gateway in mesh network applications, to accommodate physical distances up to 750 ft (229 m), overcome physical barriers, and provide for multiple transmission routes
WT-BAC-IP Gateway and BACnet® server that acts as a bridge between the devices in a mesh network application and the BACnet client
A-4000-1037 In-line oil indicating supply airfilter, barbed connections for 1/4 in. (6 mm) O.D. polytubing, 125 psig (861 kPa) maximum input pressure, five in-line filters per package
WT-BATTERY 3.6 VDC, 2700mAh, size AA lithium batteries compatible with WT-4000 Series Room Thermostats, four batteries per package

Older Post Newer Post


0 comments


Leave a comment

Please note, comments must be approved before they are published