ITS LIMITATIONS ARE ITS BEST FEATURE!
The AIM2 (Analog Isolating Module) can be adjusted to LIMIT the OUTPUT signal.
The AIM2 can RE-SCALE the output.
The AIM2 can re-scale the analog current or voltage signal from controller to actuator (or sensor to controller) and provide optical signal isolation.
AIM2 will also limit the output you set. Used commonly for signal connection to variable speed drive controllers or chiller control packages, the AIM2 is very versatile.
Some of the features are:
- Output range is field adjustable and limited to the highest adjusted value.
- Solves ground loop problems.
- 600 VAC optical isolation. 1500 VDC optical isolation.
- Input and output are selectable for voltage or current.
- LED's indicate that incoming and outgoing power supply is present.
- Isolates a signal to grounded electric actuators.
- Field select direct or reverse acting.
| Product | Type | Features |
| AIM2 | Re-scalable optical isolation of an analog signal | 24 VAC powered, 3 standard analog input and output ranges, plus adjustable output. Output is "limited". Easy-to-wire 45o terminals. |
AIM2 is provided with a snap track for mounting, however clips that fasten into the back of the snap track to allow DIN rail mounting can be ordered (DRC Kit).
